GRAVOGRAPH IS400 IQ+ CNC ENGRAVING TABLE ENGRAVER & SOFTWARE GRAVOSTYLE 8 GS8

I powered this on as shown in the pictures and engraved the plate as shown for demonstration. Computer with Gravostyle 8 installed included as shown. Monitor, keyboard, and mouse are not included. Note that the serial number on the dongle does not match the serial number written on the software box; however, it is working as shown and has been licensed for offline operation. The installation media shown is too scratched to be read by the computer and is only included for completeness; however, the Gravostyle software is currently available for download directly from Gravograph should you need it.

Payment is required in the form of an electronic bank wire. Freight shipping is required for this unit, please let me know delivery zip code, if there is access to a fork lift or loading dock, and if the location is commercial or educational.

The system includes:

• BOIT.IS400 Machine
• Commande Deporte V3 Boot 2.0 PrNG 4.17 Keypad
• Gravostyle V8 31001 Discovery
• Quatro Air Technologies AX010-126 Chip Collector
• Jaw Set 30-765
• Jaw Set 30-766
• Jaw Set Metal +/- 9.5
• Partial Bottle Gravogrip Boost 69669 as shown
• Gravograph Engraving Tip 42 007 GPY .020
• Gravograph Engraving Tip 42 007 GPY .030
• Gravograph Engraving Tip 42 007 GPY .060

IS400 can mark on all materials from the softest plastic such as PEHD to the very hardest metal like steel. You are sure to have excellent results with your applications, drilling on metallic front panels, metal cutting, surface engraving for light signage or deep marking for plaques (interior and exterior).